 |
 |
|
 |
 |
|
|
|
|
|
|
Encyclopedia :
A :
AN :
ANA :
Analytical engine |
|
|
Analytical engineThe Analytical Engine, an important step in the history of computers, is the design of a mechanical, modern general purpose computer by the British professor of mathematics Charles Babbage. It was first described in 1837, but Babbage continued to work on his design throughout his life, which ended in 1871. Because of financial and technical (e.g., legal problems) issues, the engine was never actually finished. It is generally acknowledged that the design was correct and that the engine would have worked, however the precision required for the gears would not be possible until decades later. Logically comparable general purpose computers did not come into existence until about 100 years later. Babbage began by designing and partially constructing his Difference engine, a mechanical special purpose computer designed to tabulate logarithms and trigonometric functions by evaluating approximating The machine was to be powered by a steam engine and would have been over 30 metres long and 10 metres wide. The input (programs and data) were to be provided to the machine on punch cards, a method being used at the time to direct mechanical looms. For output, the machine was planned to have a printer, a curve plotter and a bell. The machine could also punch numbers onto cards to be read in later. It employed ordinary base-10 fixed point arithmetic. There was a store (i.e., memory) capable of holding 1000 numbers of 50 digits each. An arithmetical unit (called the "mill") was able to perform all four arithmetical operations. The programming language to be employed was akin to modern day In 1842, the Italian mathematician Menabrea, who had met the travelling Babbage in Italy, In 1878, a committee of the British Association for the Advancement of Science recommended against constructing the analytical engine. In 1910, Babbage's son Henry P. Babbage reported that a part of the mill and the printing apparatus had been constructed The analytical engine was then all but forgotten with three known exceptions. Percy Ludgate wrote about the engine in 1915 and even designed his own analytical engine(it was drawn up in detail but never built). Ludgate's engine was much smaller than Babbage's of about 8 cubic feet (230 L) and was capable of multiplying two 20-decimal digit numbers in about 6 seconds. Leonardo Torres y Quevedo and Vannevar Bush also knew of Babbage's work though the three inventors likely did not know of each other. Closely related to Babbage's work on the Analytical Engine was the work of George Stibitz of Bell Laboratories in New York just prior to WWII and Howard Hathaway Aiken at Harvard, during and just after WWII. They both built electromechanical (i.e., relay and switches) computers which were closely related to the Analytical Engine, though neither was (quite) a modern programmable computer. Aiken's machine was largely financed by IBM and was called the Harvard Mark I. From Babbage's autobiography: Influences The cyberpunk novelists William Gibson and Bruce Sterling co-authored a steampunk novel of alternative history entitled The Difference Engine in which Babbage's difference and analytical engines became available to Victorian society. The novel explores the consequences and implications of the early introduction of computational technology. External links
|
|
|
This article is from Wikipedia. All text is available under the terms of the GNU Free Documentation License. |
|
| © 2008 Chamas Enterprises Inc. |
