 |
 |
|
 |
 |
|
|
|
|
|
|
Encyclopedia :
A :
AP :
APO :
Apollo PGNCS |
|
|
Apollo PGNCSThe Apollo Primary Guidance, Navigation and Control System (PGNCS) (pronounced pings) was a self-contained inertial guidance system that allowed Apollo spacecraft to carry out their missions when communications with Earth were interrupted, either as expected, when the spacecraft were behind the moon, or in case of a communications failure. The Apollo command module (CM) and lunar module (LM), were each equipped with a version of PNGCS.PGNCS was developed by the MIT Instrumentation Laboratory under the direction of Charles Stark Draper and consisted of the following components:
Components from PGNCS were used by Draper for the U.S. Navy's Deep Submergence Rescue Vehicle (DSRV). Inertial Measurement UnitThe IMU was gimbaled on three axes. The innermost stable member, a 6 inch beryllium cube, had three gyroscopes and three accelerometers mounted in it. Feedback loops including the resolvers used signals from the gyroscopes to control motors at each axis. This servo system kept the stable member fixed with respect to the stars. The IMU was derived from the guidance system developed by Draper for the Polaris missile. Inertial guidance systems are not perfect and Apollo system drifted about one miliradian per hour. Thus it was necessary to ‘’realign’’ the inertial platform periodically by sighting on stars. Optical unitThe CM had a fixed sextant which could measure angles between stars, and Earth or Moon landmarks and planetary horizon. The unit included a scanning telescope for star sightings, and could be used to determine position and orientation in space. In contrast, the LM had an Alignment Optical Telescope, and could only determine the craft's orientation. The outer element of the AOT was a sun-shielded prism that could be rotated to one of three fixed positions relative to the LM, in order to cover a large portion of the lunar sky. When rotated, the AOT's position was readable by the AGC; by pointing the reticule at several different stars, the computer could determine the craft's orientation [1]. Software The onboard guidance software used a Kalman filter to merge new data with past position measurements to produce an optimal position estimate for the spacecraft. The key information was a coordinate transformation between the IMU stable member and the two reference coordinate systems, one centered on Earth and one centered on the Moon. In the argot of the Apollo program this matrix was known as REFSMMAT (for "Reference to a Stable Member Matrix"). Who's in charge?Despite the word "primary" in its name, PGNCS data was not the main source of navigation information. Tracking data from NASA’s Deep Space Network was processed by computers at Mission Control, using least squares algorithms. The position and velocity estimates that resulted were more accurate than those produced by the PGNCS. As a result, the astronauts were periodically given REFSMMAT updates to enter into the AGC, based on ground data. PGNCS was still essential to maintain spacecraft orientation, to control rockets during maneuvering burns, including lunar landing and take off, and as the prime source of navigation data during planned and unexpected communications outages. PGNCS also provided a check on ground data. The lunar module had a third means of navigation, the Abort Guidance System (AGS), built by TRW. This was to be used in the event of failure of the PGNCS. The AGS could be used to take off from the moon, and to rendezvous with the command module, but not for landing.
|
|
|
This article is from Wikipedia. All text is available under the terms of the GNU Free Documentation License. |
|
| © 2009 Chamas Enterprises Inc. |
