Beader
A beader is a person who installs plastic moulding strips into slotted edges of metal tabletopstops using a mallet and bandsaw. The beader positions the centre of the moulding strip over the leading edge of the tabletop as it moves along a conveyor and pushes the tongue of the molding into a slot along the entire edge of the tabletop, pounding the moulding with a mallet to seat it firmly in the slot. The tabletop is then lifted from a conveyor onto a worktable where the beader cuts off overlapping ends of molding using a bandsaw and pounds the trimmed ends of the moulding into the slot to form a tight joint. A beader also heats the moulding strips in a hot water tank prior to installation if specified by the job order.
|
