Quadrature amplitude modulation

QAM redirects here; for other uses of that abbreviation, see QAM (disambiguation)

Alternately, this can be regarded (using complex number notation) as simple amplitude modulation of a complex-valued carrier wave by a single complex-valued signal.

What this actually means is that the amplitude and the phase of the carrier wave are simultaneously changed according to the information you want to transmit.

Phase modulation can also be regarded as a special case of quadrature amplitude modulation, where the amplitude of the modulating signal is constant, with only the phase varying. This can also be extended to frequency modulation, as this can be regarded as a special case of phase modulation.

QAM is used in NTSC and PAL television systems, where the in-phase and 90° components carry the components of chroma (colour) information. "Compatible QAM" or C-QUAM is used in AM stereo radio to carry the stereo difference information.

It is also used extensively in modems, and other forms of digital communication over analogue channels.
In digital applications, the modulating signal is generally quantised in both its in-phase and 90° components. The set of possible combinations of amplitudes, as shown on an x-y plot, is a pattern of dots known as a QAM constellation.

This constellation, and therefore the number of bits which can be transmitted at once, can be increased for higher bitrates and faster throughput, or decreased for more reliable transmission with fewer bit errors. The number of "dots" in the constellation is given as a number before the QAM, and is always an integer power of two -- from 2¹ (2QAM) to 2¹² (4096QAM).

64-QAM and 256-QAM are often used in digital cable television and cable modem applications. In the US, 64-QAM and 256-QAM are the mandated modulation schemes for digital cable, as standardized by the SCTE in the standard ANSI/SCTE 07 2000.

See also